Make room for sitting, sleeping and storage in your VW T7 Transporter conversion with a sliding bench and matching pod.
The 1800 mm bench is built in two 900 mm sections. Pull both sections out to create an 1800 × 1100 mm sleeping platform, or close them to a depth of 650 mm to open up the living space. Storage hatches give access beneath the bench, while the pod’s top drawer keeps everyday items close to hand.
The pod can be used as a cupboard with its removable lower door and shelf, or configured to house the Freucamp Sanjo 50-litre fridge shown in the renders.
Material choices
Plain lightweight ply
Hex board
Laminated lightweight ply
The natural-ply images show plain lightweight ply, the black textured image shows hex board, and the matt-white image shows laminated lightweight ply with exposed plywood edges. Wood colour and grain vary between sheets; your selected material determines the finished appearance.
Included in the kit
Two 900 mm sliding bench sections, forming the 1800 mm bench and bed platform
Matching pod with top drawer and removable cupboard door and shelf
The fridge and grey floor shown in the images are for illustration and are not included.
Dimensions
Bench closed: 1800 mm long × 650 mm deep × 405 mm high
Bed extended: 1800 mm long × 1100 mm wide × 405 mm high
Pod including worktop: 449 mm wide × 570 mm deep × 742 mm high
Material thickness: 15 mm
Vehicle layout
Plan your VW T7 Transporter conversion around the kit dimensions above. Check these against your vehicle’s usable floor space, lining, wheel arches and installed equipment before ordering. The renders show an illustrative layout on a T5/T6 floor; they do not show a fitted T7 installation.
Images are renders of the furniture design.
VW T7 Sliding Bed & Pod Kit – 1800 mm
flash sale

